When purchasing a new air compressor, there are many other things that you need to purchase with it in order to get the most out of your new unit. Some items such as air guns, couplers, and other useful accessories will eventually be needed in order to complete many tasks and jobs around the house or worksite. Here’s a few of the most useful products we would recommend purchasing with your new compressor.
Table of Contents
- #1 – Campbell Hausfeld MP5200 25-Piece Accessory Kit with Case
- #2 – Coilhose Pneumatics TYP-2500CS Typhoon High Volume Blow Gun
- #3 – Tekton 4725 Quick Connect Coupler Set
- #4 – Ampro A1460 18-Piece Air Tool Accessory Kit – Milton Type
- #5 – Campbell Hausfeld MP2847 17-Piece ¼-inch Air Tool and Accessory Kit
#1 – Campbell Hausfeld MP5200 25-Piece Accessory Kit with Case
Campbell Hausfeld has considered everything with its MP5200 25-piece accessory kit, complete with a carrying case. The kit includes virtually everything a new compressor owner would need, from a blow gun, inflation needle, and Teflon tape to adapters, tire chuck, and couplers. It even includes a tire gauge. All 25-pieces included in this set are neatly organized and stored in the carrying case, allowing professional contractors to take these parts with them to any job site. Durably made, backed with a 1-year limited warranty, and affordably priced, you simply cannot go wrong with this set
#2 – Coilhose Pneumatics TYP-2500CS Typhoon High Volume Blow Gun
Coilhose Pneumatics offers one of the best high-volume blow guns on the market. The TYP-2500CS Typhoon high-volume blow gun can withstand incredible temperatures, from 32 to 175 degrees Fahrenheit. Its industrial-grade design meets OSHA standards for noise level and dead-end pressure, and it’s incredibly easy to use.
The tapered tip allows users to easily clean tough to reach areas, and it’s tested safe to use for up to eight hours of continuous use.
#3 – Tekton 4725 Quick Connect Coupler Set
Tekton offers one of the easiest-to-use coupler sets on the market – the Tekton 4725 quick connect coupler set. This set is constructed of durable, solid brass to provide users with the peace of mind that each piece in this set will last many years.
The set includes a total of five pieces, which are all backed by the manufacturer’s 90-day limited warranty. The single touch connectivity and disconnecting that the product features allows users to quickly and easily change parts between projects.
#4 – Ampro A1460 18-Piece Air Tool Accessory Kit – Milton Type
Makita is one of the most trusted names in air compressors. The MAC700 is their entry-level compressor and performance lies in between the Bostitch and Senco. Same goes for its noise level, weight, and tank size. It’s a good all-around performer and the cast iron tank means it is built to last.
Not exceptional in any one category, the MAC700 is solid in all categories. Almost 500 reviewers on Amazon can’t be wrong.
#5 – Campbell Hausfeld MP2847 17-Piece ¼-inch Air Tool and Accessory Kit
The Senco PC1131 is a fantastic compressor for both DIYer and contractor use. With 2.5 HP peak horsepower putting out 4.4 CFM at 90 PSI, you get more quite a bit more airflow than the Bostitch. Weighing close to 60 pounds, you’re also getting a much heavier unit but this is mainly due to the cast iron tank for durability.
While not the most portable, you will not find a better performing air compressor for around $200. Not only is the PC1131 a workhorse, it’s relatively quiet. A great choice if you believe you need a little more oomph than the CAP1512 can provide.
When purchasing a new air compressor, your shopping experience doesn’t just end once you’ve chosen the right unit for your needs. You also need to consider the types of accessories you will be using the most during your future projects. The list above was chosen due to many factors, including ease-of-use, affordability, and durability.
In addition to the accessory kits mentioned above, new compressor owners may also want to consider other brands and accessory kits that may suit their needs even better. For instance, the Campbell Hausfeld MP6000 Tire Inflator kit offers an incredibly easy to use design, built-in gauge, and a release button to allow you to let air escape should you fill your tire too much. Another option for an easy-to-use blow gun is the Campbell Hausfeld MP5143 Pistol Grip Blowgun. This gun is lightweight, affordable, and easy to use, offering an ergonomically designed plastic handle that gives the user full control over the amount of airflow going through the nozzle.
Additionally, if you’re looking for more couplers to add to your collection, you may want to consider the Milton 715BK M-Style Quick Coupler set. This set was designed with professional contractors in mind. The balls in this set are crafted of hardened steel, and the springs are made of stainless steel to ensure quality and durability. Additionally, the plugs have been treated and plated to ensure long-lasting use.
Regardless of the reason for purchasing air tool accessories, durability, safety, and affordability are all specific features a new compressor owner should consider.