Senco PC0968 Compressor 1.5-Horsepower Review


Senco holds over fifty years worth of heritage in the manufacturing of affordable, high quality tools. The Senco PC0968 Compressor is no exception to the superior construction that is expected from this company. The PC0968 is an entry-level contractor grade compressor that is known to provide reliable, long lasting service. Here we take a look at exactly what makes this excellent offering stand out from the rest. It exceeds all expectations.

At-A-Glance Specs
Tank Size:
2.5 Gallon
Peak HP:
Max Pressure:
135 PSI
Pump Type:
Oil Type:
95 dB
(1-5 stars)




>> Check Current Price of the PC0968 <<



The Senco PC0968 is quite large and heavy when looking at its capacity. The 38 pound weight in combination with the twin-tank design make this compressor rather compact, if heavier than competitors. The top-mounted handle makes transport quick and convenient. It is also perfectly balanced. This ensures that moving the unit around is not awkward or clumsy to handle.


The 2.2 CFM at 90PSI supplied is more than enough to power a single tool. The capacity does not allow you to power more than one pneumatic device effectively. The PC0968 takes eighty-two seconds to reach full capacity at 135 PSI. The recharge time is rather quick and the duty cycle rates at just over 75%, translating to approximately forty-five minutes of continuous operation.

Pump Type

The direct drive pump runs without oil and requires little to no maintenance. An induction motor powers the unit, providing highly efficient operation. Simply keep your compressor clean and you are ensured a long span of reliable use.

Noise Level

The noise level reaches a maximum of 95dB in close proximity. Within a few feet this drops to approximately 80dB, which is louder than the average conversation. Ear protection is recommended.

Who It’s For

The Senco PC0968 Compressor, 1.5-Horsepower is a perfect tool for contractors or DIY enthusiasts who need performance in a restrictive work situation. If you need a quiet compressor to run light duty pneumatic tools, the PC0968 is will most definitely meet your needs.


  • Cold Start Valve
  • Precise Bleed Valve
  • Draws Just 8-Amps of Power
  • Durable Powder-Coated Finish
  • Low Hum During Operation


  • Pressure Gauge Difficult to Read

Final Verdict

Senco supplies the PC0968 1.5 HP 2.5-Gallon Compressor and a single ¼-inch coupler which provides an easy disconnection feature. This compressor does not need to be broken in and benefits from easy assembly. It is virtually ready to run from straight out the box. Noise levels are lower than is found with Porter-Cable compressors, but the hum is still more than noticeable.

For anyone seeking to power a single pneumatic tool, this compressor makes an excellent choice. The quality of construction is clear. The PC0968 benefits from a rock hard powder coated finish, a sturdy discharge hose coated in braided aluminum and a well machined body. The value for money is outstanding.

buy now best price


Leave A Comment...